Showing posts with label heating. Show all posts
Showing posts with label heating. Show all posts
Tuesday, August 8, 2017
Top Indicators that You Need a New and Updated Heating System
Winter is still far ahead but it is a smart decision to have your furnace looked at by a professional technician as early as now. Apart from the fact that temperatures can drop fast during a bad weather in Alberta, particularly in the Spruce Grove area, a lot of unwanted issues with your furnace may surface during winter when it’s too late for repair.
Meanwhile, if your furnace is showing signs of the need for replacement, by all means replace it just to make sure that the new unit will be in time for the cold season. The question is how do you know when you need a new furnace? Following is a list of the most apparent indicators that a replacement should be underway. Read more from this blog: http://bit.ly/2eYLRS9
Monday, July 10, 2017
Gain a New Appreciation for Your Home’s Heating by Understanding How the Gas Furnace Works
A gas furnace is an integral component of efficient heating systems in Edmonton homes, especially those located in cold regions or areas experiencing low-temperature seasons. More commonly referred to as a home furnace, it converts gas to heat with the aim of keeping the circulation of your indoor air warm. Nowadays, natural gas is being used in place of coal, wood, and oil to heat homes as an alternative way of maintaining the green environment.
IGNITION SOURCE
The conventional furnaces used a pilot light as a source of ignition when they needed to produce heat. They were fitted with a regulator that helped to supply a little flow of gas that kept a short flame burning, which readily ignited it, thus heating the house. Modern furnaces are more efficient since they use a glow stick that is made of silicon nitride as the ignition source. When the furnace calls for heat, electricity passes through the stick, which makes it glow and ignition starts. Read more from this article: http://bit.ly/2wdFhAr
IGNITION SOURCE
The conventional furnaces used a pilot light as a source of ignition when they needed to produce heat. They were fitted with a regulator that helped to supply a little flow of gas that kept a short flame burning, which readily ignited it, thus heating the house. Modern furnaces are more efficient since they use a glow stick that is made of silicon nitride as the ignition source. When the furnace calls for heat, electricity passes through the stick, which makes it glow and ignition starts. Read more from this article: http://bit.ly/2wdFhAr
Wednesday, July 22, 2015
Keeping the Furnace Functional All Year
Since
Canada is placed well in the North, temperatures can get low even in the summer
months. In Stony Plain, the hottest month is July with an average high of 25
degrees. Still, it can get a bit cold at night, reaching as low as 13 degrees.
From there, the temperatures will drop, reaching an average low of zero degrees
on October. Come December, even the average high gets below zero – only rising
above zero on March.
With this
kind of climate, it’s important to keep heaters in good condition throughout
the year. When cold nights strike, heating in the home is going
to be invaluable. Thus, it’s important to conduct a regular inspection of your
home’s heating system, especially if it’s more than 10 years old.
Taking care
of your furnace should ultimately be left to the professionals, though a
homeowner can do certain things such as minor inspections. For example, you can
take a look at the filter. If its dirty or worn out, it’s just a matter of
cleaning or replacing the filter – a task the average homeowner can take care
of easily. You can also take care of maintaining cleanliness on the area around
the equipment.
Other
things to watch out for are unusual sounds, smells, and other oddities when the
equipment is in operation. It might mean it needs a further inspection from
professionals.
Thursday, January 1, 2015
Proper Maintenance Keeps Furnaces Running
With
winter going on full blast, furnaces are working double time to keep
people warm. To ensure that your furnace stays in good working order,
it is best to have an experienced
Edmonton heating service
do regular maintenance on it. Here are some of the problems a
thorough looking over by an HVAC expert would be able to detect and
resolve.
Sunday, September 7, 2014
Some Tip to Ensure Proper Heating in Your Home
One of the big problems
Canadians face during winter is the fact that their heating bills
seem to go through the roof. It’s unavoidable since no one wants to
wake up cold as ice, which is a very uncomfortable experience.
Cutting down on your heating costs will take a bit of effort. Here’s
a few tips on how to do just that:
Friday, July 4, 2014
A Guide to Water Heating Equipment
According
to Natural Resources Canada, Canadians use an average of 75 litres
daily for household tasks, like washing dishes and doing laundry, and
showering and bathing. Simply put, water heaters are invaluable
household devices. If your existing water heater is on its last legs
and you’re considering getting a new one, take a look at your
options below:
Friday, May 2, 2014
Fire Prevention Tips for your Heating Appliances
Stony
Plain's cold climate often forces heating appliances to work
overtime. With extensive usage, these implements may end up causing
fires. However, proper storage, use, and maintenance of these
appliances would help reduce fire hazards. Here are a few fire
prevention tips for Stony Plain heating devices and furnaces.
Don’t
leave anything combustible such as paper
or fabric near the furnace. Allow at least three feet of free space
around heaters.
Subscribe to:
Posts (Atom)

